HP Synergy 480 Gen10 - System Maintenance Switch

System maintenance switchSystem maintenance switch
PositionPosition DefaultDefault FunctionFunction
S1 Off Off = HPE iLO security is enabled.
On = HPE iLO security is disabled.
S2 Off Reserved
S3 Off Reserved
S4 Off Reserved
S5* Off Off = Power-on password is enabled.
On = Power-on password is disabled.
S6* Off Off = No function
On = Reset configuration
S7 Off Reserved
S8 Off Reserved
S9 Off Reserved
S10 Off Reserved
S11 Off Reserved
S12 Off Reserved
To access redundant ROM, set S1, S5 and S6 to On.
Set swtich S9 to On for GPU expansion options
1
2
1
2
System maintenance switch 17