Installing a DIMMInstalling a DIMM
The server supports up to 24 DIMMs.
PrerequisitesPrerequisites
Before installing this option, be sure you have the following:
The components included with the hardware option kit
For more information on specific options, see the compute module QuickSpecs on the Hewlett Packard EnterpriseHewlett Packard Enterprise website website .
ProcedureProcedure
1. Power down the compute module.
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Remove the access panel .
5. Open the DIMM slot latches.
6. Install the DIMM.
7. Install the access panel .
8. Install the compute module in the rack.
9. Install the compute module.
10. Power up the compute module.
Use the BIOS/Platform Configuration (RBSU) in the UEFI System Utilities to configure the memory mode.
To Next Page
Loading...
