HP Synergy 480 Gen10 - Configuring the Compute Module for Intel Optane Persistent Memory 100 Series for HPE

8. Install any components removed to access the DIMM slots.
9. Install the access panel .
10. Slide or install the compute module into the frame.
11. If removed, reconnect all power cables.
12. Power up the compute module.
13. Configure the server for Intel Optane persistent memory for HPE.
More informationMore information
Persistent memory module population information
Configuring the compute module for Intel Optane persistent memory 100 series for HPE
Installing persistent memory modules 82