Installing the controller optionInstalling the controller option
For more information about supported options, see the product QuickSpecs on the Hewlett Packard Enterprise websiteHewlett Packard Enterprise website .
CAUTION: CAUTION: Hewlett Packard Enterprise recommends performing a complete backup of all compute module data before
installing or removing a controller or adapter.
CAUTION: CAUTION: In systems that use external data storage, be sure that the compute module is the first unit to be powered
down and the last to be powered back up. Taking this precaution ensures that the system does not erroneously mark the
drives as failed when the compute module is powered up.
ProcedureProcedure
1. Power down the compute module.
2. Remove the compute module.
3. Remove the access panel .
4. Remove the front panel/drive cage assembly .
5. Install the controller.
6. Install the front panel/drive cage assembly .
7. Install the access panel .
8. Install the compute module .
9. Power up the compute module.
To Next Page
Loading...
