DescriptionItem
Initiator: Issues I/O commands to a target port when I/O is executed between storage
systems with Continuous Access Synchronous, and so on.
Target: Receives I/O commands from a host.
RCU Target: Receives I/O commands from an initiator when I/O is executed between
storage systems with Continuous Access Synchronous, and so on.
External: Issues I/O commands to a target port of an external storage system with
External Storage.
HTP: Use this port when the external volume is mapped to the local storage system.
Specify this port to the external storage system.
FNP: Use this port when the external volume is mapped to the local storage system.
Specify this port to the local storage system.
Adds one or more ports selected in the Available Ports table to the Selected Ports table.Add
Removes one or more selected ports from the Selected Ports table and relocates the
ports to the Available Ports table.
Remove
Selected Ports table
DescriptionItem
Port identifier.Port ID
Attribute of the port indicating I/O flow.Attribute
Initiator: Issues I/O commands to a target port when I/O is executed between storage
systems with Continuous Access Synchronous, and so on.
Target: Receives I/O commands from a host.
RCU Target: Receives I/O commands from an initiator when I/O is executed between
storage systems with Continuous Access Synchronous, and so on.
External: Issues I/O commands to a target port of an external storage system with
External Storage.
Create Resource Groups wizard 233
To Next Page
Loading...
Need help?
General
