HP XP7 User Manual

DescriptionItem
Parity group identifier where the LDEV belongs.Parity Group ID
Pool name and identifier where the LDEV belongs.Pool Name (ID)
Capacity of the LDEV.Capacity
Provisioning type of the volume.Provisioning Type
Basic: Internal volume
THP: V-VOLs of Thin Provisioning
External: External volume
External MF: Migration volume
Snapshot: Fast Snap volume
Attribute of the volume indicating how the LDEV is being used.Attribute
Command Device: Command device.
Remote Command Device.
JNL VOL: Journal volume.
Pool VOL: Pool volume. The number in parentheses is the pool identifier.
Quorum Disk: Quorum disk for High Availability.
TSE: TSE-VOL.
Hyphen (-): Volume in which the attribute is not defined.
Journal identifier appears when the attribute is JNL VOL. A hyphen indicates the attribute
is other than JNL VOL.
Journal ID
Total number of selected LDEVs.Total
Selected Ports table
DescriptionItem
Port identifiers to be added to a resource group.Port ID
Attribute of the port indicating I/O flow.Attribute
Initiator: Issues I/O commands to a target port when I/O is executed between storage
systems with Continuous Access Synchronous, and so on.
Target: Receives I/O commands from a host.
RCU Target: Receives I/O commands from an initiator when I/O is executed between
storage systems with Continuous Access Synchronous, and so on.
External: Issues I/O commands to a target port of an external storage system with
External Storage.
Total number of selected ports.Total
Selected Host Groups table
DescriptionItem
Port identifiers that are used by the host group.Port ID
Name and identifier of each host group to be added to a resource group.Host Group Name
Some undefined host groups may appear. If a group is not defined, the host name is
blank.
Total number of selected host groups.Total
Add Resources wizard 241

HP XP7 Specifications

General

Brand	HP
Model	XP7
Category	Storage
Language	English