DescriptionItem
Snapshot: Fast Snap volume
Attribute of the volume indicating how the LDEV is being used.Attribute
Command Device: Command device.
Remote Command Device.
JNL VOL: Journal volume.
Pool VOL: Pool volume. The number in parentheses is the pool identifier.
Quorum Disk: Quorum disk for High Availability.
TSE: TSE-VOL.
Hyphen (-): Volume in which the attribute is not defined.
Journal ID when the attribute is JNL VOL. A hyphen indicates the attribute is other than
JNL VOL.
Journal ID
Total number of selected LDEVs.Total
Selected Ports table (when deleting ports)
DescriptionItem
Port IDs that to be deleted from the resource group.Port ID
Attribute of the port indicating I/O flow.Attribute
Initiator: Issues I/O commands to a target port when I/O is executed between storage
systems with Continuous Access Synchronous, and so on.
Target: Receives I/O commands from a host.
RCU Target: Receives I/O commands from an initiator when I/O is executed between
storage systems with Continuous Access Synchronous, and so on.
External: Issues I/O commands to a target port of an external storage system with
External Storage.
HTP: Use this port when the external volume is mapped to the local storage system.
Specify this port to the external storage system.
FNP: Use this port when the external volume is mapped to the local storage system.
Specify this port to the local storage system.
Total number of selected ports.Total
Selected Host Groups table (when deleting Host Groups)
DescriptionItem
Port IDs that are used by the host group.Port ID
Name and ID of each host group name to be deleted from the resource group.Host Group Name
Some undefined host group names may appear. If a host group is not defined, the host
name is blank.
Total number of selected host groups.Total
Remove Resources window 243
To Next Page
Loading...
Need help?
General
