Summary
DescriptionItem
Current status of the LDEV.LDEV Status
Normal: Normal status.
Blocked: Host cannot access a blocked volume.
Warning: Problem occurs in the volume.
Formatting: Volume is being formatted.
Preparing Quick Format: Volume is being prepared for quick formatting.
Quick Formatting: Volume is being quick-formatted.
Correction Access: Access attribute is being corrected.
Copying: Data in the volume is being copied.
Read Only: Data cannot be written on a read-only volume.
Shredding: Volume is being shredded.
Hyphen (-): Any status other than the above.
RAID level. An asterisk "*" indicates that the parity group to which the LDEV
belongs is interleaved (concatenated).
RAID Level
Capacity
• Free: Capacity of the free space. The control information used by the storage
system, such as control cylinders, is not included in the Free capacity.
• Total: The total capacity of the LDEVs and the "Capacity - Free" capacity is
displayed in the Total.
Drive type and rpm in use on this LDEV.Drive Type/RPM
Interleaved (concatenated) parity groups.Interleaved Parity Groups
Number of LDEVs
• Unallocated: Number of unallocated LDEVs.
• Total: Total number of LDEVs.
LDEVs tab
DescriptionItem
LDEV identifier, which is the combination of LDKC, CU, and LDEV.LDEV ID
LDEV name.LDEV Name
LDEV status.Status
Normal: Normal status.
Blocked: Host cannot access a blocked volume.
Warning: Problem occurs in the volume.
Formatting: Volume is being formatted.
Preparing Quick Format: Volume is being prepared for quick formatting.
Quick Formatting: Volume is being quick-formatted.
LDEVs tab: Internal or external volumes 255
To Next Page
Loading...
Need help?
General
