Selected Pools table
DescriptionItem
Displays the pool name and pool ID.Pool Name (ID)
Displays RAID level of the pool. If multiple RAID levels exist in a pool, this field
indicates that RAID levels are mixed. If all pool-VOLs are external volumes, a
hyphen (-) is displayed.
RAID Level
Displays the total capacity of the created pool in the specified unit.Capacity
For open systems, the displayed capacity is approximately 4.1 GB (capacity of
the management area) less than the total capacity of the selected pool-VOLs.
For mainframe systems, the displayed capacity is approximately 3.7 GB (capacity
of the management area) less than the total capacity of the selected pool-VOLs.
Displays the pool type.Pool Type
For a Thin Provisioning pool, THP is displayed.
For a Smart Tiers pool, Smart is displayed.
For a Thin Provisioning Z pool, Mainframe THP is displayed.
For a Smart Tiers Z pool, Mainframe Smart is displayed.
For a Fast Snap pool, FS is displayed.
Displays the data drive type and RPM. If multiple drive types or RPMs exist in a
pool, this field indicates Mixed. When the volume is the external volume, Drive
Type displays External Storage and the value of the external LDEV tier rank.
Drive Type/RPM
Displays the pool threshold.User-Defined Threshold (%)
• Warning: Warning threshold is displayed.
• Depletion: Depletion threshold is displayed.
For a Fast Snap pool, a hyphen (-) is displayed for Depletion.
Displays subscription limit of the pool.Subscription Limit (%)
For Fast Snap pool, a hyphen (-) is displayed.
Create Pools wizard 319
To Next Page
Loading...
Need help?
General
