DescriptionItem
Displays the pool name and pool ID.Pool Name (ID)
Displays the RAID level. If multiple RAID levels exist in a pool, this field indicates
that RAID levels are mixed. If all pool-VOLs are external volumes, a hyphen (-)
is displayed.
RAID Level
Displays the pool capacity.Capacity
Displays the pool type.Pool Type
For a Thin Provisioning pool, THP is displayed.
For a Smart Tiers pool, Smart is displayed.
For a Thin Provisioning Z pool, Mainframe THP is displayed.
For a Smart Tiers Z pool, Mainframe Smart is displayed.
For a Fast Snap pool, FS is displayed.
Displays the data drive type and RPMs. If multiple drive types or RPMs exist in
a pool, this field indicates Mixed. When the volume is the external volume, Drive
Drive Type/RPM
Type displays External Storage and the value of the external LDEV tier rank. If
all pool-VOLs are external volumes, a hyphen (-) is displayed.
Displays the pool threshold.User-Defined Threshold (%)
• Warning: Warning threshold is displayed.
• Depletion: Depletion threshold is displayed.
For a Fast Snap pool, a hyphen (-) is displayed for Depletion.
Displays the subscription limit.Subscription Limit (%)
For Fast Snap pool, a hyphen (-) is displayed.
Displays whether the protect function for THP V-VOL is being enabled or disabled.
If the setting is enabled, when the pool-VOL is blocked, THP V-VOL is protected
Protect V-VOLs when I/O fails to
Blocked Pool VOL
from reading and writing requests. And at the same instant, the access attribute
of the THP V-VOL is changed to the Protect attribute.
328 Thin Provisioning and Smart Tiers GUI reference
To Next Page
Loading...
Need help?
General
