Available Pool Volumes table
Only the LDEVs assigned to the user are displayed.
DescriptionItem
Displays the LDEV identifier, which is the combination of LDKC, CU, and LDEV.LDEV ID
Displays the LDEV name.LDEV Name
Displays the pool-VOL capacity.Capacity
Displays the parity group ID.Parity Group ID
Displays the RAID level. If an LDEV is an external volume, a hyphen (-) is
displayed.
RAID Level
Displays the data drive type and RPM. When the volume is the external volume,
Drive Type displays External Storage.
Drive Type/RPM
Displays the emulation type.Emulation Type
Displays the type of the LDEV.Provisioning Type
Basic: Internal volume.
External: External volume.
Displays whether the cache mode is enabled. If the LDEV is not an external
volume, a hyphen (-) is displayed.
Cache Mode
Displays the information about parity group encryption.Encryption
Enabled: The encryption of the parity group which contains LDEV is enabled.
Disabled: The encryption of the parity group which contains LDEV is disabled.
338 Thin Provisioning and Smart Tiers GUI reference
To Next Page
Loading...
