Selected Pool Volumes table
DescriptionItem
Displays the LDEV identifier, which is the combination of LDKC, CU, and LDEV.LDEV ID
Displays the LDEV name.LDEV Name
Displays the pool-VOL capacity.Capacity
Displays the parity group ID.Parity Group ID
Displays the RAID level. If an LDEV is an external volume, a hyphen (-) is
displayed.
RAID Level
Displays the data drive type and RPM. When the volume is the external volume,
Drive Type displays External Storage.
Drive Type/RPM
Displays the tier rank of the external volume. If the volume is not an external
volume, a hyphen(-) is displayed.
External LDEV Tier Rank
Displays the emulation type.Emulation Type
Displays the type of the LDEV.Provisioning Type
Basic: Internal volume.
External: External volume.
Displays whether the cache mode is enabled. If the LDEV is not an external
volume, a hyphen (-) is displayed.
Cache Mode
Displays the information about parity group encryption.Encryption
Enabled: The encryption of the parity group which contains LDEV is enabled.
Disabled: The encryption of the parity group which contains LDEV is disabled.
340 Thin Provisioning and Smart Tiers GUI reference
To Next Page
Loading...
Need help?
General
