Pool Properties table
DescriptionItem
Displays the pool name and pool ID.Pool Name (ID)
Displays the pool type.Pool Type
For a Thin Provisioning pool, THP is displayed.
For a Smart Tiers pool, Smart is displayed.
For a Thin Provisioning Z pool, Mainframe THP is displayed.
For a Smart Tiers Z pool, Mainframe Smart is displayed.
For a Fast Snap pool, FS is displayed.
Displays the pool capacity in the specified unit.Capacity
Displays the user-defined threshold (Warning/Depletion).User-Defined Threshold
(Warning/Depletion)
Displays the subscription limit.Subscription Limit
For a Fast Snap pool, a hyphen (-) is displayed for Current or Limit.
Displays the RAID level. If multiple RAID levels exist in a pool, this field indicates
that RAID levels are mixed. If all pool-VOLs are external volumes, a hyphen (-)
is displayed.
RAID Level
Displays LDEV ID and LDEV name of the pool-VOL which includes the system
area. If you open this window from the Selected Pools table in the Create Pool
window, a hyphen(-) is displayed.
Pool VOL with System Area (Name)
Pool Volumes table
Only the LDEVs assigned to the user are displayed.
DescriptionItem
Displays the LDEV identifier, which is the combination of LDKC, CU, and LDEV.LDEV ID
Displays the LDEV name.LDEV Name
Displays the pool volumes capacity in the specified unit. If you open this window
from the Selected Pools table in the Create Pool window, the LDEV capacity
selected in the Select Pool VOLs window is displayed.
Capacity
Pool Property window 343
To Next Page
Loading...
Need help?
General
