Available Hosts table
This table lists information about the registered hosts.
DescriptionItem
Identifier of the port.Port ID
WWN of the port.HBA WWN
Name of the host.Host Name
Name of the host group.Host Group Name
Indicates whether this is a new host.New Host
• Yes: The host is newly added and has never been connected via a cable
to any port in the storage system.
• No: The host has been connected via a cable to another port.
LUN security setting (Enabled or Disabled) on the port.Port Security
Adds a new host. Or, select host bus adapters then click to assign a
nickname to the host bus adapter.
Add New Host
Available Ports table
This table lists the registered ports.
DescriptionItem
Identifier of the port.Port ID
Attribute of the port indicating I/O flow.Attribute
• Initiator: Issues I/O commands to a target port when I/O is executed
between storage systems with Continuous Access Synchronous, and so
on.
• Target: Receives I/O commands from a host.
Create Host Groups wizard 387
To Next Page
Loading...
Need help?
General
