HP XP7 - Page 412

Available Host Groups table
This table lists the host groups for which LU paths can be copied. Only the host group assigned to
the logged-on user are available.
DescriptionItem
Identifier of the port.Port ID
Name of the host group.Host Group Name
The host mode of the host group.Host Mode
Attribute of the port indicating I/O flow.Port Attribute
• Initiator: Issues I/O commands to a target port when I/O is executed
between storage systems with Continuous Access Synchronous, and so
on.
• Target: Receives I/O commands from a host.
• RCU Target: Receives I/O commands from an initiator when I/O is
executed between storage systems with Continuous Access Synchronous,
and so on.
• External: Issues I/O commands to a target port of an external storage
system with External Storage.
LUN security setting (Enabled or Disabled) on the port.Port Security
Number of hosts registered in the host group.Number of Hosts
Details about the selected host group.Detail
Adds host groups selected from the Available Host Groups table to the
Selected Host Groups table.
Add
Removes the selected host groups from the Selected Host Groups table.Remove
412 LUN Manager GUI reference