Table 5-3 Computer Setup—Advanced (for advanced users) (continued)
Option Heading
Lets you disable individual expansion slots.
Allow PCIe/PCI SERR# Interrupt (enable/disable)
Allows PCI devices to report PCI/PCIe System Error signals, such as address parity errors, data parity errors,
and critical errors other than parity. Default is enabled.
Power Button Override (disable/4 sec/15 sec)
Lets you disable or enable and select the number of seconds you have to hold down the power button for it
to force the system to power o. Default is ‘4 sec’.
Built-In Device Options Embedded LAN Controller
Select to show the device in the operating system. Default is enabled.
Wake On LAN
Lets you either disable the Wake On LAN feature, or congure where the computer boots, including
the network or hard drive. Default is Boot to Network.
Audio Device
Select to show the device in the operating system. Default is enabled.
Internal Speakers (does not aect external speakers)
Clear to disable the chassis speaker or speakers. This function is applicable to normal audio playback in
the operating system and does not aect the error or warning beeps during POST. Default is enabled.
Increase PCIe Idle Fan Speed(%)
Sets idle fan speed percentage. This setting only changes the minimum fan speed. The fan is still
automatically controlled.
Port Options Allows you to hide the following ports from the operating system:
●
Serial port A
●
Serial port B
●
SATA0 thru SATA7
●
eSATA0
●
eSATA1
●
Internal USB ports
●
Front USB ports
●
Rear USB ports
●
USB Type-C Controller(s) rmware version
●
Media card reader
Option ROM Launch Policy These policies control whether Legacy Option ROMs or UEFI drivers are loaded. Default is ‘All UEFI.’
Congure Option ROM Launch Policy
●
All legacy
●
All UEFI
●
All UEFI except video
Mini OROM Display Policy This policy controls whether optional ROM text appears in a small window on the splash screen until a key is
pressed.
Computer Setup (F10) Utilities 45