d. Detach the display hub board (4) from the display back cover. The board is attached with
double-sided adhesive.
The display hub board is available using spare part number N99099-001.
24. To replace the WLAN antenna cables and transceivers:
a. Detach the WLAN antenna transceivers (1) from the display back cover. The transceivers are
attached to the display back cover with double-sided adhesive.
b. Release the WLAN antenna cables from the routing clips (2) and channels that are built into
the right hinge area.
The WLAN antenna cables and transceivers are available using spare part number
N99106-001.
25. To replace the WWAN antenna cables and transceivers:
a. Detach the WWAN antenna transceivers (1) from the display back cover. The transceivers are
attached with double-sided adhesive.
Display assembly
91
To Next Page
Loading...
