22. To replace the display hub board cable:
a. Disconnect the display hub board cable (1) from the display hub board.
b. Detach the display hub board cable (2) from the display back cover. The cable is attached with
double-sided adhesive.
The display hub board cable is included in the Display Cable Kit, spare part number
N99102-001 and includes double-sided adhesive.
23. To replace the display hub board:
a. Disconnect the ambient light sensor module cable (1) from the display hub board.
b. Disconnect the camera module cable (2) from the display hub board.
c. Disconnect the sensor module cable (3) from the display hub board.
90
Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
