20. To replace the sensor module cable:
a. Disconnect the sensor module cable (1) from the display hub board.
b. Disconnect the sensor module cable (2) from the sensor module.
c. Detach the sensor module cable (3) from the display back cover. The cable is attached with
double-sided adhesive.
The sensor module cable is included in the Display Cable Kit, spare part number N99102-001
and includes double-sided adhesive.
21. To replace the sensor module:
■
Detach the sensor module from the display back cover. The sensor module is attached to the
display back cover with double-sided adhesive.
The sensor module is available using spare part number N99098-001.
Display assembly
89
To Next Page
Loading...
