18. To replace the camera module cable:
a. Disconnect the camera module cable (1) from the display hub board.
b. Disconnect the camera module cable (2) from the camera module.
c. Detach the camera module cable (3) from the display back cover. The cable is attached with
double-sided adhesive.
The camera module cable is included in the Display Cable Kit, spare part number N99102-001.
19. To replace the camera module:
■
Detach the camera module from the display back cover. The camera module is attached to the
display back cover with double-sided adhesive.
The camera module is available using spare part number N99100-001 and includes double-
sided adhesive.
88
Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
