Table 5-5 Memory module descriptions and part numbers (continued)
Description Spare part number
8 GB, NECC N37792-001
8 GB, for use in the People's Republic of China N77398-001
Memory module thermal pads N19245-001
Before removing memory modules, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 41).
2. Remove the service cover (see Service cover on page 41).
3. Disconnect the battery cable from the system board (see Battery on page 42).
If you are replacing a memory module, remove the existing memory module:
1. Release the clip (1) on the left side of the memory module compartment cover.
2. Lift the left side of the cover (2) up, and then pull the cover (3) up and to the left to remove it.
3. Detach the grounding tape (1) that secures the memory module compartment cover to the
computer, and then remove the cover (2).
The memory module compartment cover is included in the Bracket Kit, spare part number
N50688-001.
48
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
To Next Page
Loading...
