Table 6-15 Display assembly descriptions and part numbers (continued)
Description Spare part number
WUXGA, antiglare, 400 nits, models with a camera and WWAN, touch screen N99093-001
WUXGA, antiglare, 400 nits, models without a camera, touch screen N99094-001
WUXGA, antiglare, 400 nits, touch screen N99095-001
Before removing the display assembly, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 41).
2. Remove the service cover (see Service cover on page 41), and then remove the following
components:
a. Battery (see Battery on page 42)
b. WWAN module thermal module (see WWAN module on page 45)
c. Memory module cover (see Memory modules on page 47)
d. Bottom case (see Bottom case on page 60)
Remove the display assembly:
1. Remove the WWAN module plate (1).
The WWAN module plate is included in the Plastics Kit, spare part number N19226-001.
2. Disconnect the wireless antenna cables (2) from the WWAN module.
NOTE: Computer models have one to four WWAN antenna cables. The antenna cables have tags
that identify them with a number that corresponds to a terminal on the WWAN module. Connect the
antenna cable to the corresponding WWAN module terminal.
3. Disconnect the camera module cable (3) from the system board.
Display assembly
81
To Next Page
Loading...
