13. To replace the display bezel:
a. Flex the outside edge of the top of the bezel (1) away from the display assembly to release it
from the display assembly.
b. Flex the outside edges of the left and right sides (2) of the bezel to release them from the
display assembly.
c. Flex the outside edge of the bottom of the bezel (3) away from the display assembly to release
it from the display assembly.
d. Remove the display bezel (4).
IMPORTANT: To avoid damaging the panel, do not use a tool to release the inside of the bezel.
You can use a tool only when you insert it from the outside of the top, left, and right sides of the
bezel. Use your fingers to lift up on the bezel. Avoid pressing down on the panel during removal.
The display bezel is available using the following spare part numbers:
● N19209-001: For use on models with a camera
● N19210-001: For use on models without a camera
84
Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
