14. To replace the display hinges:
a. Remove the six Phillips M2.5 × 6.7 screws (1) that secure the hinges to the display back cover.
b. Remove the hinges (2).
The display hinges are available using spare part number N19233-001.
15. To replace the display panel:
a. Release the display panel cable from the retention clips (1) that are built into the left hinge area.
b. The display panel is secured to the display back cover with double-sided tape that is installed
under the lower-left and lower-right corners (2) of the panel. To remove the panel, use tweezers
to grasp the end of the tape.
Display assembly
85
To Next Page
Loading...
