c. While turning the tweezers, wrap the tape around the tweezers (3) as you continue to pull the
tape out from behind the display panel (4). You must pull the tape multiple times before it is
completely removed.
d. Remove the display panel from the display back cover.
e. Place the display panel on the work surface with the panel side facing down.
f. Detach the adhesive support strip (1) that secures the display panel cable to the display panel
connector.
g. Release the support bar (2) that secures the display panel cable to the display panel
connector.
h. Disconnect the display panel cable (3) from the display panel.
The display panel is available using the following spare part numbers:
● P01341-001: 1000 nit panel
● P01342-001: 400 nit panel
The display panel cable is included in the Display Cable Kit, spare part number N99102-001.
86
Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
