HP ZBOOK STUDIO 16 G10 - Page 64

c. Remove the display panel assembly.
d. Remove the webcam cable.
e. Detach the webcam from the display back cover. The webcam is attached to the display back
cover with double-sided adhesive.
The webcam is available using spare part number N51318-001.
14. To remove the ALS board:
a. Remove the display assembly.
b. Remove the display bezel.
c. Remove the display panel assembly.
d. Remove the two Phillips M1.5 × 2.0 screws (1) that secure the ALS board to the display back
cover.
e. Release the LIF connector (2) the ALS board cable is connected to, and then disconnect the
ALS board cable from the sensor board.
f. Detach the ALS board cable (3) from the display back cover. The ALS board cable is attached
to the display back cover with double-sided adhesive.
g. Remove the ALS board (4) and cable.
The ALS board and cable are available using spare part number N10915-001.
Display assembly
57