HPE ProLiant DL380 Gen10 - Page 90

◦ HPE iLO 5 Firmware version 143
◦ HPE Innovation Engine Firmware version 21.x or later
Download the required firmware and drivers from the Hewlett Packard Enterprise website (https://www.hpe.com/
info/persistentmemory).
• A supported operating system:
◦ Windows Server 2012 R2 with persistent memory drivers from Hewlett Packard Enterprise
◦ Windows Server 2016 with persistent memory drivers from Hewlett Packard Enterprise
◦ Windows Server 2019
◦ Red Hat Enterprise Linux
76 and later
◦ Red Hat Enterprise Linux 80 and later
◦ SUSE Linux Enterprise Server 12 SP4 and later
◦ SUSE Linux Enterprise Server 15 with SUSE-SU-20190224-1 or later kernel update
◦ SUSE Linux Enterprise Server 15 SP1 with SUSE-SU-20191550-1 or later kernel update
◦ VMware vSphere 67 U2 + Express Patch 10 (ESXi670-201906002) or later (supports App Direct and Memory modes)
◦ VMware vSphere 65 U3 or later (supports Memory mode)
• Hardware and licensing requirements for optional encryption of the HPE Persistent Memory modules:
◦ HPE TPM 20 (local key encryption)
◦ HPE iLO Advanced License (remote key encryption)
◦ Key management server (remote key encryption)
For more information, see the HPE Persistent Memory User Guide on the Hewlett Packard Enterprise website (https://
www.hpe.com/info/persistentmemory-docs).
Installing an HPE Persistent Memory module
Use this procedure only for new HPE Persistent Memory module installations. If you are migrating this HPE Persistent Memory
module from another server, see the HPE Persistent Memory User Guide on the Hewlett Packard Enterprise website (https://
www.hpe.com/info/persistentmemory-docs).
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
• The components included with the hardware option kit
• A T-10 Torx screwdriver might be needed to unlock the access panel.
Procedure
1. Observe the following alerts:
Hardware options installation
90