HPE ProLiant Gen10

Downloading the AHS log through IP
For more information, see the Intelligent Provisioning user guide at http://www.hpe.com/info/
intelligentprovisioning/docs.
Procedure
1. Open Intelligent Provisioning [F10] at boot-up.
2. Click Perform Maintenance.
3. Click Active Health System download.
4. Leave the range as the default or as instructed by the Hewlett Packard Enterprise technician.
5. Click Download.
Downloading the AHS log using the AHS CLI for Windows
Procedure
1. Download the AHS download utility from the Hewlett Packard Enterprise Support Center.
2. Install the package to the server.
3. Run AHSdownload from the command line.
The AHS log is downloaded to the server.
4. Transfer the log to your local PC.
Downloading the AHS Log using the AHS CLI for Linux
Procedure
1. Download the AHS download utility from the Hewlett Packard Enterprise Support Center.
2. Install the package to the server.
3. Run AHSdownload from the command line.
The AHS log is downloaded to the server.
4. Transfer the log to your local PC.
Clearing the AHS log using iLO
If the log file is corrupt, clear and restart logging, use the following procedure. You must have the
Configure iLO Settings privilege to perform this procedure.
Procedure
1. If you are using iLO 4, navigate to the Information > Active Health System Log page.
If you are using iLO 5, click Information in the navigation tree, and then click the Active Health
System Log tab.
2. Click Show Advanced Settings.
3. Scroll to the Clear Log section, and then click the Clear button.
Downloading the AHS log through IP 157