5. Click one of the task buttons:
• If you select View Diagnostic Report, the report appears. When you are finished viewing the
current report, click Close or Save.
• If you select Save Diagnostic Report, wait for the report to generate, and then click Close Report
or Save Report.
For more information about reports and viewing them in a browser, see the HPE Smart Storage
Administrator User Guide on the Hewlett Packard Enterprise website.
HPE Smart Storage Administrator Diagnostics Utility CLI
About the utility
The HPE Smart Storage Administrator Diagnostics Utility CLI collects all possible information about
storage devices in the system, detects all problems, and provides a detailed configuration report in .zip
format.
After downloading and installing the software, you can run the utility as a CLI in an online environment.
The functionality in this utility is mirrored in the diagnostics features of the HPE Smart Storage
Administrator, which can be run in an offline environment.
The utility generates two types of reports:
• Array diagnostic report
This report contains information about all devices, such as array controllers, storage enclosures, drive
cages, as well as logical, physical, and tape drives. For supported solid state drives, this report also
contains SmartSSD Wear Gauge information.
• SmartSSD Wear Gauge report
160 HPE Smart Storage Administrator Diagnostics Utility CLI
To Next Page
Loading...
