HPE ProLiant Gen10

POST issues—No boot, no video flowchart
Symptom
The server will not boot and has no video output.
Action
To resolve the issue, follow the steps in the flowchart.
Figure 8: POST issues—No boot, no video flowchart
For the location of server LEDs and information on their statuses, see the server documentation on the
Hewlett Packard Enterprise website (http://www.hpe.com/info/proliantgen10-docs).
For more information about the Active Health System Viewer, see the AHSV user guide on the Hewlett
Packard Enterprise website (http://www.hpe.com/support/ahsv-docs).
More information
System power LED definitions on page 25
48 POST issues—No boot, no video flowchart