HPE ProLiant Gen10

This report contains information about the current usage level and remaining expected lifetime of solid
state drives attached to the system.
For more information, see "Reported information."
Reported information
The array diagnostic report provides detailed information about devices (array controllers, storage
enclosures, drive cages, physical drives, logical drives, and tape drives).
For example, device information on a typical embedded controller might include:
• Software versions
• Errors
• Controller information:
◦ Name
◦ Attached devices
◦ Description
◦ PCI bus
◦ PCI device
◦ PCI function
• Drive information:
◦ Interface
◦ WWID
◦ Drive model
◦ Serial number
◦ Firmware revision
◦ Total blocks
The SmartSSD Wear Gauge report contains information on the current usage level of and expected
lifetime remaining for solid state drives attached to the system.
For discovered SSDs, the report summary page provides the following calculated totals:
• Total Solid State Drives with Wearout Status
• Total Smart Array Solid State Drives
• Total Non Smart Array Solid State Drives
• Total Solid State SAS Drives
• Total Solid State SATA Drives
• Total Solid State Drives
In addition to these totals, the summary page also displays the following tables:
Reported information 161