HPE ProLiant Gen10

System power LED Definition
Off (Server) System has no power.
Off (Server blade)
If the Health Status LED bar is off, then the system
has no power.
If the Health Status LED bar is flashing green, then
the Power On/Standby Button service is being
initialized.
Solid amber System is in standby, Power On/Standby Button
service is initialized.
Flashing green System is waiting to power on, Power On/Standby
button is pressed.
Solid green System is powered on.
Health status LED bar definitions (c-Class server blades only)
Server blades have a health status LED bar with the following status definitions:
• Solid Green = Normal
• Flashing Green = Power On/Standby Button service is being initialized.
• Flashing Amber = Degraded condition
• Flashing Red = Critical condition
Front panel LED and buttons
Standard descriptions for most HPE ProLiant Gen10 servers are provided in this section. HPE ProLiant
Gen10 server blades have a Health status LED bar instead of the Health LED described in this section.
26 Health status LED bar definitions (c-Class server blades only)