a. Do the following:
• For tower models, open and remove the tower bezel.
• For rack models, if installed, remove the security bezel.
b. Power down the server.
2. Release the power cords from the strain relief straps.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the power supply or power supply blank
to cool before touching it.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server .
4. Remove the power supply.
To replace the component, reverse the removal procedure.
40 Removal and replacement procedures
To Next Page
Loading...
