• Four-bay power supply backplane
To replace the component, reverse the removal procedure.
Systems Insight Display assembly
The HPE Systems Insight Display (SID) is available as an option only for rack configurations.
CAUTION:
When routing cables, always be sure that the cables are not in a position where they can be pinched or
crimped.
To remove the component:
1. Remove the security bezel.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server .
42 Systems Insight Display assembly
To Next Page
Loading...
