HPE SmartDrive hot-plug drive definitions
Item LED Status Definition
1 Locate Solid blue The drive is being identified by
a host application.
Flashing blue The drive carrier firmware is
being updated or requires an
update.
2 Activity ring Rotating green Drive activity.
Off No drive activity.
3 Do not remove Solid white Do not remove the drive.
Removing the drive causes one
or more of the logical drives to
fail.
Off Removing the drive does not
cause a logical drive to fail.
4 Drive status Solid green The drive is a member of one or
more logical drives.
Flashing green The drive is rebuilding or
performing a RAID migration,
strip size migration, capacity
expansion, or logical drive
extension, or is erasing.
Table Continued
HPE SmartDrive hot-plug drive definitions 97
To Next Page
Loading...
