HPE ProLiant ML350

4. Extend the server from the rack.
5. Remove the access panel.
6. Remove the air baffle.
7. Remove the fan cage.
8. Disconnect the Systems Insight Display assembly cable from the system board. For more information,
see "System board components."
9. Remove the screws securing the Systems Insight Display assembly.
10. Remove the Systems Insight Display assembly.
To replace the component, reverse the removal procedure.
HPE Smart Storage Battery
To remove the component:
1. Do one of the following:
• For tower models, open and remove the tower bezel.
• For rack models, if installed, remove the security bezel.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server .
4. Do one of the following:
• For tower models, place the server on a flat, level surface with the access panel facing up.
• For rack models, extend the server from the rack.
5. Remove the access panel.
6. Remove the air baffle.
7. Remove the fan cage.
8. Disconnect the Smart Storage Battery cable from the system board.
9. Remove the Smart Storage Battery.
HPE Smart Storage Battery 43