HPE ProLiant ML350

Item Description Status
1 Power cap
Green = Power cap applied
Amber = Power not available
Off = Standby on not configured
2 AMP Status
Green = AMP mode enabled
Amber = Failover or invalid configuration
Off = AMP mode disabled
3 DIMM LEDs
Amber = DIMM error
Off = Normal
4 NIC LED
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
All other LEDs
Off = Normal
On = Failed
Systems Insight Display LED combinations
When the health LED on the front panel illuminates either amber or red, the server is experiencing a health
event. Combinations of illuminated SID LEDs, the system power LED, and the health LED indicate system
status.
Systems Insight
Display LED and
color
Health LED System power LED Status
Processor (amber) Red Amber
One or more of the following conditions
might exist:
• Processor in socket X has failed.
• Processor X is not installed in the
socket.
• Processor X is unsupported.
• ROM detects a failed processor
during POST.
Processor (amber) Amber Green Processor in socket X is in a pre-failure
condition.
DIMM (amber) Red Green One or more DIMM s have failed.
DIMM (amber) Amber Green DIMM in slot X is in a pre-failure
condition.
Overtemperature
(amber)
Amber Green The Health Driver has detected a
cautionary temperature level.
Table Continued
84 Systems Insight Display LED combinations