HPE StoreOnce 6500

Field Description
Copy Throughput The copy speed.
Source Item Size The size of the source item to be copied; this may be larger than the data size
value (but no smaller).
Source Item Last
Modified
The date that the source item was last modified. This is useful if you need to
check whether the source item might have been modified during the copy
attempt. An error message is also generated if the source item is modified whilst
copying.
Source Item Copy
Offset
This identifies where the data to be copied occurs within the source item.
Source Item Copy
Size
This identifies the size of the data to be copied within the source item.
Destination Item
Copy Offset
This identifies where the data to be copied will be placed within the destination
item.
Copy Duration The amount of time taken to copy the data.
Data Copied The amount of data copied, which will match the data size.
Bandwidth
Utilisation
The bandwidth utilization in Mb/s. This is the physical bandwidth consumed.
Bandwidth Saving The amount of bandwidth saved. The % bandwidth saving depends upon
whether the store has been configured for source-side deduplication with a low-
bandwidth transfer policy, or target-side deduplication with a high-bandwidth
transfer policy. See Viewing the store details on page 91.
Unsuccessful
Retry Attempts
If there are multiple unsuccessful attempts, a network link may be down or a
blackout window may be scheduled.
Next Copy
Attempt Time
This is the time that the next copy will be attempted, if the previous one was
unsuccessful.
Copy Operation
Cancelled
This indicates whether the user has cancelled the copy job or not.
Transport Protocol Specifies whether the copy was performed using Fibre Channel, TCP-IP or the
StoreOnce Internal Network.
Canceling a copy job
HPE recommends canceling copy jobs via the backup application and only using the GUI as a last resort.
This ensures that the backup application catalog stays in sync with the backup images.
StoreOnce Catalyst functions 111