HPE StoreOnce 6500

Field Description Editable
Number of Logins
The number of client FC ports zoned with that StoreOnce
Catalyst over FC port. The number is accurate as of the last
reboot. FC logins do not get removed if a client FC port is
unzoned.
No
Number of Devices per Login This value determines the number of backup and restore
connections that are allowed for each client login to that port
on the StoreOnce System. Increase this value if multiple
concurrent backup streams are required. The maximum
allowed is 256. See Initial configuration for more
information. Be sure to set this value correctly to ensure that
enough connections are available between the client FC port
and the StoreOnce FC port.
Yes
Device Login Information
(Click the plus sign (+) next to the Device Name to expand and see this information for the device.)
After you have zoned StoreOnce Catalyst over FC with your client, open this to confirm that you see the
host Fibre Channel address in this list. (This list is only accurate from the last StoreOnce node reboot.)
Once zoned, the logged in device will remain in the list of hosts, even if the host is later logged out/
unzoned.
Login ID Each login is assigned an incremental login number. No
Host FC Address The FC address of the host for the device. No
Host World Wide Node Name A unique identifier for the host node. No
Host World Wide Port Name A unique identifier for the host port associated with the host
node.
No
Host Emulation Automatically set to Default emulation. For AIX clients,
change the Default host emulation to AIX to enable client
logins. After changing the emulation, perform an AIX device
file rescan on the client.
Yes
Initiator Devices: Used for StoreOnce Catalyst Copy over Fibre Channel only
Device Name
The name of the StoreOnce Catalyst over FC port. No
Status
The status of the StoreOnce Catalyst over FC device. No
FC Address
The FC address of the StoreOnce Catalyst over FC device, or
"Down" if not connected.
No
World Wide Node Name
Generated automatically by the StoreOnce System and used
for Fibre Channel zoning for Fibre Channel initiator devices.
Zone with the Copy Destination FC target World Wide Name.
No
World Wide Port Name
Generated automatically by the StoreOnce System and used
for Fibre Channel zoning for Fibre Channel initiator devices.
Zone with the Copy Destination FC target World Wide Name.
No
Initial configuration
Initial configuration 87