HPE StoreOnce 6500

Table 26: Fibre Channel Settings
Field Description Editable
Identifier The FC address of the StoreOnce System. No
Identifier Alias An alias for the FC address to make it easier to identify the
StoreOnce System in the backup application. The alias must
begin with the “COFC-” prefix and cannot contain any special
characters except a hyphen (-).
Yes
Target Ports: There is a row for each FC port on the StoreOnce System
Port The port number. No
Port Location The PCIe card slot number and port number (for example,
HBA-6 Port1).
Status The status of the port and its current speed. No
Speed The speed of the port. The default is Auto, which is the
recommended option. The speed will be auto-negotiated
between the switch and StoreOnce appliance to choose the
highest supported speed. For users who wish to fix the
speed, other values are available.
Yes
Topology The default is N_Port, when a single target device creates
many virtual devices on a fabric attached port. N_Port
requires the switch port to support NPIV (N_Port ID
Virtualization).
No
Beacon Check this box to beacon the port on the FC card. Yes
Devices: Devices are split into Target Devices and Initiator Devices. There is a row for each
device on the StoreOnce System.
Target Devices: Used for Fibre Channel backup/restore/copy.
Device Name The name of the StoreOnce Catalyst over FC port. No
Status
The status of the StoreOnce Catalyst over FC device.
No
FC Address
The FC address of the StoreOnce Catalyst over FC device, or
"Down" if not connected.
No
World Wide Node Name
Generated automatically by the StoreOnce System and used
for Fibre Channel zoning for Fibre Channel target devices.
Zone with the Copy Source FC target World Wide Name or
the FC client FC port WWN for backup/restore.
No
World Wide Port Name
Generated automatically by the StoreOnce System and used
for Fibre Channel zoning for Fibre Channel target devices.
Zone with the Copy Source FC target World Wide Name or
the FC client FC port WWN for backup/restore.
No
Table Continued
86 StoreOnce Catalyst functions