Deleting a capacity threshold alert
Procedure
1. On the Capacity Threshold Alerts page, select the threshold alert to delete.
2. Click Delete.
3. On the Delete Capacity Threshold Alerts confirmation window, click Yes.
4. The alert is removed from the Capacity Threshold Alerts page.
Device reports
Virtual device group reports contain data about the virtual tape libraries, NAS shares, and StoreOnce
Catalyst stores that are configured on the remote appliances.
There are several types of device reports you can run:
• Device status reports on page 157
• Device throughput reports on page 158
•
Device storage reports on page 159
• Device StoreOnce Federated Catalyst stores reports on page 159
NOTE: Until you create at least one virtual device group, the Device button will be disabled.
Select device (appliance tabs)
In the Select Device dialog box, you will see a list of devices. Select the devices you want to include in
your report and click OK.
Field Description
Device name The name given to the device when it was created
Device type The device type: VTL, NAS share, or StoreOnce
Catalyst
NOTE: The device type will have the label
(Dedupe disabled) if deduplication is not enabled
on the device.
Select device (device tabs)
In the Select Device dialog box, you will see a list of devices. Select the devices you want to include in
your report and click OK.
156 Deleting a capacity threshold alert
To Next Page
Loading...
