HPE StoreOnce 6500

Exporting a previously installed certificate
Procedure
1. From the Navigator, go to Device Configuration > User Interface > SSL Certificate
2. Click Export Certificate.
3. In the Export Certificate dialog box, click Generate.
A copy of the .crt file is downloaded to the appliance /repository folder.
Event Management
The Event Management page allows you to change the Audit Log Retention Period, which is the number
of days the system will store the audit logs. After this period, the logs are permanently deleted.
To change this setting:
Procedure
1. Click Modify to open the Event Management window.
2. Enter the number of days (from 15 to 365, default is 30) to retain the Audit event logs.
3. If you shorten the Audit event logs retention period, for example, from 30 days to 15 days, the Audit
event logs will be truncated to remove all logs older than 15 days and from that point forward will only
keep the last 15 days worth of logs. Audit logs are not immediately purged when you shorten the
retention period—It may take up to 12 hours to complete the purge.
NOTE: You cannot delete Audit event logs using the Delete button on the Events page. To remove
Audit event logs, you must modify the Audit Log Retention Period on this User Interface page.
4. Click OK. The retention period will take effect the next time you log in. Your current session will still
have the previous retention period.
Log export
The Log Export page displays the Log Export recipient list with the following information:
• ID
• Host IP address
• Protocol type
• Port number
• Log type
Adding a new recipient
Procedure
1. On the Log Export page, click Add.
2. In the Add Recipient window, complete the following information:
Exporting a previously installed certificate 175