HPE StoreOnce 6500

Field Description
Queued Time The time the copy job was queued.
Started Time The time the copy job was started.
Stopped Time The time the job ended.
Estimated
Completion Time
The estimated completion time, if the copy job is still running.
Source Appliance The address of the source server. The source is the Service Set on the
StoreOnce System from which the job is being copied to a Service Set on this
StoreOnce System.
Source Store The name of the source store on the StoreOnce System from which the job is
being copied.
Source Item Name The name of the source item on the StoreOnce System from which the job is
being copied. All item names are defined by the backup application.
Copy Throughput The copy speed.
Source Item Size The size of the source item to be copied; this may be larger than the data size
value (but no smaller).
Source Item Last
Modified
The date that the source item was last modified. This is useful if you need to
check whether the source item might have been modified during the copy
attempt. An error message is also generated if the source item is modified whilst
copying.
Source Item Copy
Offset
This identifies where the data to be copied occurs within the source item.
Source Item Copy
Size
This identifies the size of the data to be copied within the source item.
Destination Item
Copy Offset
This identifies where the data to be copied will be placed within the destination
item.
Copy Duration The amount of time taken to copy the data.
Data Copied The amount of data copied, which will match the data size.
Bandwidth
Utilisation
The bandwidth utilization in Mb/s. This is the physical bandwidth consumed.
Bandwidth Saving The amount of bandwidth saved. The % bandwidth saving depends upon
whether the store has been configured for source-side deduplication with a low-
bandwidth transfer policy, or target-side deduplication with a high-bandwidth
transfer policy. See Viewing the store details on page 91
Table Continued
114 StoreOnce Catalyst functions