Field Description
Unconfigured Raw
Storage
The amount of storage capacity (in TB) that is physically attached but has not
yet been fully provisioned.
Unlicensed Capacity The storage capacity (in TB) that requires additional licenses.
If there is a Capacity License required, a hyperlink, Apply License, and a
warning icon will appear alongside the Capacity License Required field.
Clicking this link redirects to the License Management page.
The Configured Storage table shows the storage hardware expansions that are currently configured.
Each unit of expansion is shown separately.
There are tabs for each couplet present in the cluster (tabs will only be present for couplets that exist).
There are two entry rows in the table for each expansion because the storage is always added
symmetrically between the two server nodes.
Table 44: Configured and unconfigured storage parameters
Field Description
Description The name given to the unit of storage being referenced. This name will either
be Base Storage or Storage Expansion:
• Base disk storage for the product, which may be storage in the head
server or in an external enclosure, based on the model
• Expansion disk storage comprised of a set of 11 disks in a storage
enclosure
Hardware The type of expansion enclosure containing the disks.
Enclosure Name The name of the specific enclosure. This may be the same as the model.
RAID Cluster UUID The ID of the RAID cluster that connects to the storage expansion/
subexpansion.
Enclosure Serial
Number
The serial number of the enclosure.
Location The logical and physical location of the disks that comprise the storage
expansion in the format: Port; Box; Bays.
• Port is the controller port of the primary controller that has access to the
storage (for example, Port 1l, 1E, 2E).
• Box is the incremental number of expansion enclosures or drawers
attached to that controller port (for example, 1, 2, 3).
• Bay is the drive bay(s) that contain the disks.
Table Continued
130 Storage configuration and reporting
To Next Page
Loading...
