Serial Number The serial number of the appliance.
Free Space The amount of free space on the appliance.
Online Whether or not the appliance is online.
Protocol Version The protocol of the appliance software.
Click on an appliance to view more detailed status information in the bottom half of the screen, as
described in the following table.
Table 14: Target appliance parameters
Target Appliance tab
(some fields are editable).
Appliance Name The name that is used to identify the Target Appliance. You specify it on
the Local Appliance tab of the partner appliance.
Product Class The product class of the appliance.
Appliance Address The virtual address of the service set.
You specify it when you add the Target Appliance and can edit it later.
Serial Number The serial number of the Target Appliance; it cannot be edited.
Command Protocol Port
Number
The port number that will be used for command protocol.
Data Protocol Port Number The port number that will be used for data protocol.
Available Indicates whether the Target Appliance is available or not.
Replication Protocol Identifies the replication protocol in use.
User Data Stored The amount of user data stored on the Target Appliance.
Capacity Shows the capacity of the Target Appliance.
Free Space Shows the amount of free space on the Target Appliance.
Software Version Shows the software version of the Target Appliance.
System Time Shows the current system time.
Table Continued
Replication functions 57
To Next Page
Loading...
