HPE XP7

Summary view
I want to ...
• View Port summary on page 194
• View LDEV summary on page 215
• View RAID Group summary on page 195
• View Top10 – Frontend IO on page 197
• View Top 10 Backend IO on page 198
• View MP Blade utilization summary for
XP7 disk arrays on page 200
• View pools summary for P9500/XP7 disk
arrays on page 202
• View Array Summary on page 192
• Create custom groups
• View custom group configurations
• Modify custom groups
• Start/Stop real-time performance data
collection
• View trending graphs
• View forecasting graphs
• Save template charts
Learn more
• About Summary view on page 190
• View Continuous Access summary on page
208
• About Custom Groups
About Summary view
PA provides the overall configuration, performance, of the components of the XP, P9500 and the XP7 disk
arrays on the Summary View main screen. The data is displayed from the last performance data
collection time stamp and includes the following:
• The configuration and component distribution summary.
• The performance summary, which includes the average performance of the frontend and the backend
components, Cache, and CLPR for an XP disk array.
• Historical graphs for the metrics listed in the tabular format. To plot charts for a metric in Summary
View, click on the hyperlink of a metric.
In addition to the above-mentioned, the continuous access data and average utilization of each MP blade
is also displayed for an P9500/XP7 disk array.
NOTE: The CHIPs and ACPs are applicable only for the XP20000 Disk Arrays. They are replaced
by the CHAs and the DKAs for the XP24000 Disk Array, and P9500 disk arrays.
190 Summary view