HPE XP7

Screen elements Description
Dispatch Threshold Displays the threshold value that you set for the component. PA
triggers an alarm if the performance value of a component rises
or drops below the set threshold value.
Time Posted Displays the time when a record was first displayed for a
component on the Alarm History screen.
The Time Posted displays a new time stamp again when PA
creates a new record for the same component after dispatching
the appropriate alarm notification.
Time Updated Displays the time stamp when PA updates the current
performance value of a component under Value. The Time
Updated does not display any time stamp if the alarm
configured for a component is deleted or alarm is disabled on
the Alarm Configurations screen.
Time Dispatched Displays the time stamp when the alarm notification is
dispatched to the intended recipient.
Status Displays the status on email and SNMP notifications, and script
execution. The five possible statuses are listed as follows:
• Status 0: Timed Out : in case alarm cannot be triggred in the
given time(this time is specified in the Email_TimeOut field
of the serverparameters.properties file)
• Status 1: InCorrect SNMP Setting : in case SNMP address
is invalid
• Status2: SNMP Protocol Error: In case there is problem in
sending mail to SNMP server
• Status 3: Failed to dispatch : Runtime problem like network
connectivity etc
• Status 4: Successful
NOTE:
In case email, SMTP or Script is not configured, then the
status is displayed as NA.
Filter records in Alarms History table
Procedure
1. From the HPE XP7 Performance Advisor main menu, click Alarm History.
2. Filter and view component records based on the options described in the Alarms History Filters
table.
3. Click Filter. PA filters the existing set of records and displays only those that match the selection
criteria on the Alarm History screen. The records are displayed in an ascending order.
164 Filter records in Alarms History table