HPE XP7

RAID Groups screen details
Screen elements Description
Filters
Arrays Displays all the arrays that PA monitors.
Status Displays the status of an individual RG component.
RAID Group Displays all the RAID Groups configured in the selected array.
RAID level Displays all the RAID level in an array. The XP7 array supports
the following RAID levels: RAID1, RAID5, RAID6.
Drive Type Displays all the supported drive types.
Master pane details
Status icon Displays the icon indicating the current status for the selected
RAID Group. The status for a RAID Group is determined based
on the Overall Raidgroup Utilization metric.
RG The RAID Group to which the host belongs.
RAID Level The corresponding RAID level for a RAID Group. You cannot
select a RAID level if the drive type is External Storage.
Drive Type The corresponding drive type for a RAID Group.
Utilization The total utilization of the RAID Group.
Detail pane > Chart View: Metrics Default metric
Yes/No
Overall RAID Group Utilization Yes
RAID Group Utilization Random
Reads
No
RAID Group Utilization Random
Writes
No
RAID Group Utilization Random
Write Parity
No
RAID Group Utilization Seq Reads No
RAID Group Utilization Seq Writes No
RAID Group Utilization Seq Write
Parity
No
Table Continued
RAID Groups screen details 187