Screen elements Description
SLPR Name Displays the SLPR group ID.
NOTE: SLPR does not exist in the P9500/XP7 disk
arrays. So, the SLPR group ID is displayed only for the
XP disk arrays.
Port Type Displays the port type, such as iSCSI, FCoE (applicable for
P9500/XP7 disk arrays) for the port ID.
E-seq(s) Displays the Ext-Lun provider's serial number for the array.
Max IO/s Displays the maximum frontend I/Os on the port.
Avg IO/s Displays the average of the total frontend I/Os.
Min IO/s Displays the minimum frontend I/Os on the port.
Max MB/s Displays the maximum frontend throughput in MB/s.
Min MB/s Displays the minimum frontend throughput in MB/s.
Avg MB/s Displays the average frontend throughput in MB/s.
View RAID Group summary
To view the RAID Group summary view from the main menu, navigate to Summary View > Raid
Groups. This feature totals the LDEV I/Os, LDEV MB/s values for all the LDEVs on a given RAID Group.
In addition, it also displays the percentage of the RAID Group utilization random read, random write,
random write parity, sequential read, sequential write, sequential write parity, and the overall RAID Group
percentage utilization (sum of the above percentages) on a given RAID Group.
The RAID Group utilization percentage is not displayed for external storage volumes.
Figure 5: RAID Group summary
View RAID Group summary 195
To Next Page
Loading...
