S.No. Chart elements Description
7 Data points Displays the data points plotted in a chart. By default, only the
data points that are plotted for the last one hour of the
management station's time are displayed in the detail pane.
8 Threshold line The red dotted-line horizontal to the X-axis (Date and Time)
indicates the threshold line/threshold value for metrics.
9 Zoom panel Displays the zoom bar to zoom in on data points for a specified
threshold duration.
IMPORTANT:
By default, the performance graphs in the Chart View are plotted only for the last 1 hour of the
management station's time.
NOTE:
• These selections work only on the active chart windows.
• If the total number of data points from all the performance graphs exceeds 500 in a chart
window, the data points are not rendered to optimize the charting functionality in PA. You can
hover the pointing device over the line graphs to view the data points.
• The performance or utilization graphs for inactive components will only have the start and end
data points plotted in the chart window, and connected by a straight line.
• For every individual component the percentile value is displayed in the tool tip.
Plot charts
Prerequisite
The performance data is collected.
30 Plot charts
To Next Page
Loading...
